Specifications

The Paperwrap machine needs pre-folded leaflets to wrap around the product and they are fed out of the friction feeder. Using folded sheets instead of reels means that low volume work can be handled economically and with a quick turnaround.

The wrap can be plain or printed and can be supplied on a wide variety of paper stock. The following sizes are a guide only and may need adjusting for thicker packs.

A4

Flat size             450mm x 340mm
Folded size       220mm x 340mm

Panel sizes are 40mm x 340mm; then 220mm x 340mm then 190mm x 340mm

Folding

Fold the glue flap first – 40mm fold length
Then the second fold – 220mm fold length

This will give an overlap for the long glue seam of approx 10mm

Note: for easy opening the short flap is folded first and the second flap sits over the top of it 

A5

Flat size             330mm x 250mm
Folded size       160mm x 250mm

Panel sizes are 40mm x 250mm; then 160mm x 250mm then 130mm x 250mm

Folding

Fold the glue flap first – 40mm fold length
Then the second fold – 160mm fold length

This will give an overlap for the long glue seam of approx 10mm

Note: for easy opening the short flap is folded first and the second flap sits over the top of it 

Recommended paper stock

80 – 120gsm